Reverse Engineering Representation Using an Image Processing Modification

Main Article Content

Ahmed Ahmed A. A. Duroobi Nareen Hafidh Obaeed Safaa Kadhim Ghazi

Abstract

In the reverse engineering approach, a massive amount of point data is gathered together during data acquisition and this leads to larger file sizes and longer information data handling time. In addition, fitting of surfaces of these data point is time-consuming and demands particular skills. In the present work a method for getting the control points of any profile has been presented. Where, many process for an image modification was explained using Solid Work program, and a parametric equation of the profile that proposed has been derived using Bezier technique with the control points that adopted. Finally, the proposed profile was machined using 3-aixs CNC milling machine and a compression in dimensions process has been occurred between the proposed and original part so as to demonstrate the verification of the proposed method.

Article Details

How to Cite
A. DUROOBI, Ahmed Ahmed A.; OBAEED, Nareen Hafidh; GHAZI, Safaa Kadhim. Reverse Engineering Representation Using an Image Processing Modification. Al-Khwarizmi Engineering Journal, [S.l.], v. 15, n. 1, p. 56- 62, feb. 2019. ISSN 2312-0789. Available at: <http://alkej.com/index.php/en/article/view/759>. Date accessed: 23 mar. 2019. doi: https://doi.org/10.22153/kej.2019.03.001.
Section
Articles

References

[1] B. L. Curless," New Methods for Surface Reconstruction from Range Images", Department of Electrical Engineering, Stanford University, June, 1997.
[2] M. Poniatowska," Deviation Model Based Method of Planning Accuracy Inspection of Free-Form Surfaces Using C.M.M", Division of Production Engineering, Faculty of Mechanical Engineering, Bialystok University of Technology, 2012.
[3] A. Kus, "Implementation of 3D Optical Scanning Technology for Automotive Applications" Sensors 2009, 9, Uludağ University, 2009.
[4] W. Kadhim, M. Mohammed., "Constricting Multi-Patches B-spline Surfaces" Eng. & Tech. Journal, University of Technology, Vol. 31, Part (A), No. 1, 2015.
[5] D. Zhang, P. Yang and X. Qian, "Adaptive NC Path Generation from Massive Point Data with Bounded Error", Department of Mechanical, Materials and Aerospace Engineering, Illinois Institute of Technology, Journal of Manufacturing Science and Engineering, Vol. 131 / 011001-1, February 2009.
[6] M. Tawfiq, A. abdusamii, S. Kadhim, Ahmed, "enhancement tool path generation using ANN", Eng. & Tech. Journal, University of Technology, Vol. 31, Part (A), No. 1, 2016.